FREE SHIPPING OVER £60*

EASY UK RETURNS & EXCHANGES*

Caring & Using Liveryman Harmony Plus Clippers

Caring & Using Liveryman Harmony Plus Clippers

Team GS |

The Harmony plus is a cordless clipper with a long enough runtime to do a full clip, designed to be used anywhere. The additional option of a external battery means you can extend the clipping time. No cables means you can concentrate on clipping with out worrying about keeping the cables away from horses feet. This is also useful for clipping restless horses or nervous horses which can be unpredictable while clipping.

How long do I need to charge my harmony plus when I take it out of the box?

The harmony plus requires a full 24 hour charge when it is purchased even if the light turns blue shortly after being plugged in.

How long will my harmony plus run for?

The harmony plus has an internal battery run time of up to 90 minutes from a 3 hour charge.

The red light is flashing on my harmony plus what does that mean?

The red light begins to flash when you have 20 minutes of run time left on your machine.

What blades fit the harmony plus?

The harmony plus takes A5 snap on blades.

Can the harmony plus be used off mains?

Yes the harmony plus can be used off mains, its own internal battery or the optional external battery pack

How do I put blades on my harmony plus?
  • Get that double click
  • Your A5 blade MUST double click
  • The hinge on your new Harmony Plus may be a little bit stiff so it can take a little bit more pressure to apply your blade correctly
  • To attach your blade ensure the lever is in the UPRIGHT position
    • Place your blade on the lever
    • Press firmly down until you hear 2x clicks

DO NOT try to clip if your blade is not attached correctly

How do I remove the blade from my harmony plus?
  1. Face your clipper down
  2. Hold down the red release button at the back of the clipper
  3. Push the blade back towards you fully with your two index fingers

It is important to pull your blade the whole way back before lifting it off so the drive lever stays in an upright position to refit the next blade.

If the blade is removed a little early and the lever goes down you will need a philips head screwdriver to manually lift the lever whilst holding the red button.

Instructions for use: